.png){kind=logo}
1/2 HP Non-automatic Submersible Sewage Pump
1194991
MFG #: 267-0002
- Type: Manual
- Discharge Connection: 2"
- Shutoff Head: 21-1/2'
- Horsepower: 1/2 hp
- Flow Rate: 128 GPM
- Voltage: 115V to 460V
- Cord Length: 15'
- Specifications
- Description
- Documents
- Type: Single Seal, Simplex, Non-Automatic, Submersible
- Suction Size: 4 Inch Inlet
- Discharge Size: 2 Inch or 3 Inch
- End Connection: Hub x Threaded
- Overall Dimensions: 13-5/32 Inch Width x 14-9/32 Inch Height
- Float Type: 4-Pole Integral Mechanical
- Flow Rate: 128 GPM
- Discharge Head: 21.5 Foot
- Casing Material: ASTM Class 25 Cast Iron (Switch)
- Shaft Material: AISI 1215 Cold Rolled Steel
- Housing Material: Epoxy Powder Coated, ASTM Class 25 Cast Iron
- Impeller Material: Engineered Plastic with Metal Insert
- Impeller Design: Non-Clogging Vortex
- Shaft Seal Details: Carbon and Ceramic Mechanical Seal
- Solid Size: 2 Inch (Spherical)
- Power Cord Length: 15 Foot
- Power Rating: 1/2 HP
- Input Supply Rating: 115 to 460 Volt AC 60 Hertz 1/3-Phase 1.5 to 10.4 Amp
- Speed Rating: 1750 RPM
- Temperature Rating: 130 Deg F
- Motor Type: Class B Insulation, Oil Filled, Hermetically Sealed, Split Phase, Automatic Reset Thermally Overload Protected
- Options: Piggyback Variable Level Float Switch, SmartPak Plus Residential Alternator, Variable Level Control Switch, Duplex Electrical Alternator Control Panel, 18 Inch x 30 Inch Basin, A-Pak Alarm System, Watertight Junction Box, Rail System and Disconnect
- Inclusions/Features: Upper and Lower Sleeve Bearing, Stainless Steel Hardware, Neoprene Square Ring and Gasket, Cast Iron Base/Motor Housing/Cap, Stainless Steel Screw/Bolt/Handle/Guard/Arm, 3-Wire Neoprene Cord and Plug
- Application: Residential and Light Commercial Sewage and Effluent/Dewatering, New Construction, Wastewater/Lift Station
- Applicable Standard: UL, CSA (Canada and US)
- Additional Information: Switch Point Size 12 Inch (On), 4 Inch (Off); Number of Gallon Pumped 8 Gallon per 36 Liter