1/2 HP Cast Iron Case Submersible Dewatering Pump

• Type: Submersible
• Discharge Size: 1-1/2 Inch
• Overall Dimensions: 11 Inch Width x 16-1/2 Inch Height
• Flow Rate: 0 to 77 GPM
• Discharge Head: 44 Foot
• Casing Material: Powder Coated Epoxy Cast Iron
• Housing Material: Powder Coated Epoxy Cast Iron
• Impeller Material: Glass Reinforced Thermoplastic
• Impeller Design: Non-Clogging Vortex
• Shaft Seal Details: Ceramic Carbon
• Power Cord Length: 20 Foot
• Power Rating: 1/2 HP
• Input Supply Rating: 115 Volt AC 10.5 Amp
• Speed Rating: 3450 RPM
• Temperature Rating: -33 to 170 Deg F
• Pressure Rating: 30 PSIG at 70 Deg F
• Motor Type: Hermetically Sealed
• Inclusions/Features: Piggyback Electrical Supply Cord, 20 Amp Internal Relay, Alarm Test and Silence Switch, 304 Stainless Steel Probe
• Application: Elevator Sump, Transformer Vault, Dewatering
• Applicable Standard: UL 778, CSA (Canada and US), ASME A17.1, CSA 22.2

Dewatering Pump; Type Submersible; Discharge Size 1-1/2 Inch; Overall Dimensions 11 Inch Width x 16-1/2 Inch Height; Flow Rate 0 to 77 GPM; Discharge Head 44 Foot; Casing Material Powder Coated Epoxy Cast Iron; Housing Material Powder Coated Epoxy Cast Iron; Impeller Material Glass Reinforced Thermoplastic; Impeller Design Non-Clogging Vortex; Shaft Seal Details Ceramic Carbon; Power Cord Length 20 Foot; Power Rating 1/2 HP; Input Supply Rating 115 Volt AC 10.5 Amp; Speed Rating 3450 RPM; Temperature Rating -33 to 170 Deg F; Pressure Rating 30 PSIG at 70 Deg F; Motor Type Hermetically Sealed; Inclusions/Features Piggyback Electrical Supply Cord, 20 Amp Internal Relay, Alarm Test and Silence Switch, 304 Stainless Steel Probe; Application Elevator Sump, Transformer Vault, Dewatering; Applicable Standard UL 778, CSA (Canada and US), ASME A17.1, CSA 22.2

Catalog
Specification/Technical
Data Sheet/Technical
Installation/Operator
Other 1