1-1/2" NPT, 115 VAC 60 Hz 1-phase, 7.5 A, 1/2 HP, 3400 RPM, 61 GPM , Thermoplastic Case, Submersible, Sump Pump

• Type: Submersible
• Discharge Size: 1-1/2 Inch
• End Connection: Threaded
• Overall Dimensions: 9.6 Inch Length x 6.4 Inch Width x 12.1 Inch Height
• Float Type: Built-In Vertical
• Flow Rate: 61 GPM
• Discharge Head: 29 Foot
• Casing Material: Thermoplastic
• Shaft Material: Carbon Steel
• Housing Material: Cast Iron
• Impeller Material: Thermoplastic
• Shaft Seal Details: Carbon/Ceramic/Buna/Stainless Steel
• Solid Size: 1/2 Inch
• Power Cord Length: 10 Foot
• Power Rating: 1/2 HP
• Input Supply Rating: 115 Volt AC at 60 Hertz 1-Phase 7.5 Amp
• Speed Rating: 3400 RPM
• Temperature Rating: 104 Deg F
• Motor Type: Class B Insulation, Overload Protection with Automatic Reset
• Inclusions/Features: Heavy Duty Ball Bearing (Upper and Lower), Corrosion-Resistant
• Application: Basement Draining, Water Transfer, Dewatering, Effluent Transfer
• Applicable Standard: CSA (Canada and US), CSA 22.2 108, UL 778
• Additional Information: Basin Diameter 18 Inch

Sump Pump; Type Submersible; Discharge Size 1-1/2 Inch; End Connection Threaded; Overall Dimensions 9.6 Inch Length x 6.4 Inch Width x 12.1 Inch Height; Float Type Built-In Vertical; Flow Rate 61 GPM; Discharge Head 29 Foot; Casing Material Thermoplastic; Shaft Material Carbon Steel; Housing Material Cast Iron; Impeller Material Thermoplastic; Shaft Seal Details Carbon/Ceramic/Buna/Stainless Steel; Solid Size 1/2 Inch; Power Cord Length 10 Foot; Power Rating 1/2 HP; Input Supply Rating 115 Volt AC at 60 Hertz 1-Phase 7.5 Amp; Speed Rating 3400 RPM; Temperature Rating 104 Deg F; Motor Type Class B Insulation, Overload Protection with Automatic Reset; Inclusions/Features Heavy Duty Ball Bearing (Upper and Lower), Corrosion-Resistant; Application Basement Draining, Water Transfer, Dewatering, Effluent Transfer; Applicable Standard CSA (Canada and US), CSA 22.2 108, UL 778; Basin Diameter 18 Inch

Installation/Operator
Brochure