.png){kind=logo}
1 HP Single Seal Submersible Sewage Pump
1914985
MFG #: 284-0004
- Type: Manual
- Discharge Connection: 2"
- Shutoff Head: 35'
- Horsepower: 1 hp
- Flow Rate: 179 gpm
- Voltage: 230V
- Cord Length: 15'
- Specifications
- Description
- Documents
- Type: Single Seal, Simplex, Non-Automatic, Submersible
- Suction Size: 4 Inch Inlet
- Discharge Size: 2 Inch or 3 Inch
- End Connection: Hub x Female Threaded
- Overall Dimensions: 13-9/16 Inch Width x 18-13/16 Inch Height
- Flow Rate: 179 GPM
- Discharge Head: 35 Foot
- Casing Material: ASTM Class 30 Cast Iron (Switch)
- Shaft Material: 1117 Carbon Steel
- Housing Material: Epoxy Powder Coated, Class 30 Cast Iron
- Impeller Material: Cast Iron
- Impeller Design: Non-Clogging Vortex
- Shaft Seal Details: Carbon and Ceramic Mechanical Seal
- Solid Size: 2 Inch (Spherical)
- Power Cord Length: 15 Foot
- Power Rating: 1 HP
- Input Supply Rating: 230 Volt AC 60 Hertz 1-Phase 10.3 Amp
- Speed Rating: 1725 RPM
- Temperature Rating: 130 Deg F
- Motor Type: Class B Insulation, Oil Filled, Hermetically Sealed, Permanent Split Capacitor, Automatic Reset Thermally Overload Protected
- Options: Piggyback Variable Level Float Switch, Duplex Electrical Alternator Control Panel, Simplex Electrical Control Panel, Basin, A-Pak Alarm System, Rail System and Disconnect
- Inclusions/Features: Upper and Lower Ball Bearing, Stainless Steel Hardware, Neoprene Square Ring and Gasket
- Application: Commercial Sewage and Dewatering, Wastewater, Lift Station
- Applicable Standard: UL, CSA (Canada and US)
- Additional Information: Switch Point Size 16-1/2 Inch (On), 5-1/4 Inch (Off)