Goulds Water Technology

2" NPT Discharge, 230 VAC 60 Hz 1-phase, 7.3 A, 0.5 HP, 3450 RPM, 80 GPM, Cast Iron Case, Submersible, Effluent Pump

137950 MFG #: WE0512H
Goulds Water Technology 80 GPM Effluent PUmp 137950
  • Discharge Connection: 2"
  • Shutoff Head: 45'
  • Horsepower: 1/2 hp
  • Flow Rate: 80 gpm
  • Voltage: 230V
  • Cord Length: 20'
  • Specifications
  • Description
  • Documents
  • Type: Submersible
  • Discharge Size: 2 Inch
  • End Connection: Threaded
  • Overall Dimensions: 11-1/2 Inch Length x 8-1/2 Inch Width x 16 Inch Height
  • Flow Rate: 80 GPM
  • Discharge Head: 45 Foot
  • Casing Material: Cast Iron
  • Shaft Material: Stainless Steel
  • Impeller Material: Cast Iron
  • Impeller Design: Semi-Open
  • Shaft Seal Details: Silicon Carbide vs Silicon Carbide Face Mechanical Seal
  • Solid Size: 3/4 Inch
  • Power Cord Length: 20 Foot
  • Power Rating: 0.5 HP
  • Input Supply Rating: 230 Volt AC at 60 Hertz 1-Phase 7.3 Amp
  • Speed Rating: 3450 RPM
  • Temperature Rating: 104 Deg F (Continuous), 140 Deg F (Intermittent)
  • Motor Type: Capacitor Start, Class F Insulation
  • Inclusions/Features: Impeller, Casing, Mechanical Seal, Motor Shaft, Motor, Ball Bearing, Power Cable, Casing O-Ring, Fastener
  • Application: Home, Farm, Trailer Court, Motel, School, Hospital, Industry, Effluent System
  • Applicable Standard: CSA (Canada and US), CAN 22.2, UL778
  • Additional Information: Impeller Diameter 3.56 Inch, Full Load Efficiency, 53 Percent
Effluent Pump; Type Submersible; Discharge Size 2 Inch; End Connection Threaded; Overall Dimensions 11-1/2 Inch Length x 8-1/2 Inch Width x 16 Inch Height; Flow Rate 80 GPM; Discharge Head 45 Foot; Casing Material Cast Iron; Shaft Material Stainless Steel; Impeller Material Cast Iron; Impeller Design Semi-Open; Shaft Seal Details Silicon Carbide vs Silicon Carbide Face Mechanical Seal; Solid Size 3/4 Inch; Power Cord Length 20 Foot; Power Rating 0.5 HP; Input Supply Rating 230 Volt AC at 60 Hertz 1-Phase 7.3 Amp; Speed Rating 3450 RPM; Temperature Rating 104 Deg F (Continuous), 140 Deg F (Intermittent); Motor Type Capacitor Start, Class F Insulation; Inclusions/Features Impeller, Casing, Mechanical Seal, Motor Shaft, Motor, Ball Bearing, Power Cable, Casing O-Ring, Fastener; Application Home, Farm, Trailer Court, Motel, School, Hospital, Industry, Effluent System; Applicable Standard CSA (Canada and US), CAN 22.2, UL778; Impeller Diameter 3.56 Inch, Full Load Efficiency, 53 Percent