Goulds Water Technology

2" Flanged Discharge, 230 VAC 60 Hz 1-phase, 18 A, 2 HP, 3500 RPM, 220 GPM , 20' Cord, Gray Cast Iron Case, Submersible, Sewage Pump

140227 MFG #: WS1012BF
Goulds Water Technology 220 GPM Sewage Pump 140227
  • Discharge Connection: 2"
  • Shutoff Head: 38'
  • Horsepower: 2 hp
  • Flow Rate: 183 gpm
  • Voltage: 230V
  • Cord Length: 20'
  • Specifications
  • Description
  • Documents
  • Type: Submersible
  • Discharge Size: 2 Inch
  • End Connection: Flanged
  • Overall Dimensions: 12-1/2 Inch Length x 8-1/4 Inch Width x 19 Inch Height
  • Flow Rate: 183 GPM
  • Discharge Head: 38 Foot
  • Casing Material: ASTM A48 Gray Cast Iron
  • Shaft Material: 300 Series Stainless Steel
  • Impeller Material: ASTM A48 Cast Iron
  • Impeller Design: Semi-Open, Ejector Vane
  • Shaft Seal Details: Silicon Carbide vs Silicon Carbide Face Mechanical Seal
  • Solid Size: 2 Inch
  • Power Cord Length: 20 Foot
  • Power Rating: 1 HP
  • Input Supply Rating: 230 Volt AC 60 Hertz 1-Phase 12.3 Amp
  • Speed Rating: 1750 RPM
  • Temperature Rating: 104 Deg F (Continuous), 140 Deg F (Intermittent)
  • Motor Type: Capacitor Start, Class B Insulation, Overload with Automatic Reset
  • Inclusions/Features: Heavy Duty Ball Bearing (Upper and Lower)
  • Application: Home, Sewage System, Dewatering Effluent, Water Transfer
  • Applicable Standard: CSA (Canada and US), CSA 22.2 108, UL 778
  • Additional Information: Impeller Diameter 5.75 Inch; Full Load Efficiency 60 Percent
Sewage Pump; Type Submersible; Discharge Size 2 Inch; End Connection Flanged; Overall Dimensions 12-1/2 Inch Length x 8-1/4 Inch Width x 19 Inch Height; Flow Rate 183 GPM; Discharge Head 38 Foot; Casing Material ASTM A48 Gray Cast Iron; Shaft Material 300 Series Stainless Steel; Impeller Material ASTM A48 Cast Iron; Impeller Design Semi-Open, Ejector Vane; Shaft Seal Details Silicon Carbide vs Silicon Carbide Face Mechanical Seal; Solid Size 2 Inch; Power Cord Length 20 Foot; Power Rating 1 HP; Input Supply Rating 230 Volt AC 60 Hertz 1-Phase 12.3 Amp; Speed Rating 1750 RPM; Temperature Rating 104 Deg F (Continuous), 140 Deg F (Intermittent); Motor Type Capacitor Start, Class B Insulation, Overload with Automatic Reset; Inclusions/Features Heavy Duty Ball Bearing (Upper and Lower); Application Home, Sewage System, Dewatering Effluent, Water Transfer; Applicable Standard CSA (Canada and US), CSA 22.2 108, UL 778; Impeller Diameter 5.75 Inch; Full Load Efficiency 60 Percent